Ask Mr. Fix it

One off hot tub spas can be built in virtually any shapes and sizes unlike portable hot tubs. When you look at a custom ‘ target=’_blank’>spa hot tub you will notice the outstanding pool scape you may take note of the tile work you might even notice the mesmerizing water but what you might not know is the exact type of construction that was used to create the hot tub spa. the usual types of construction for a custom hot tub will fall into one of four distinct categories concrete, fiberglass portable hot tub, vinyl and ‘ target=’_blank’>Redwood hot tubs are also common.

Concrete is the most flexible method of construction for a custom hot tub the construction time may take a little bit longer than with a ‘ target=’_blank’>portable spa you are not confined to the producers designs.

A concrete hot tub can be built to your careful demands in practically layout that you desire. A recommended knowledgeable concrete pool- hot tub contractor can create a hot tub that works with your decor and with any landscaping limitations.

To start the procedure of building a concrete hot tub the building crew will dig a hole and install the required pipes for the plumbing, then they will start to make a rebar form that will add strength to the concrete. There are two basic forms of concrete hot tubs, gunite and shot create. Though they include the same ingredients they do have a couple of distinct differences. Gunite uses a very dry mix that has water in added into it as it is exhausted from the application hose. Shot create on the other hand uses a wet concrete formula that comes mixed in a truck. It is pumped directly from the concrete truck. As it contains more moisture it will require a somewhat longer drying time then Gunite. The debate about which is better will go on for many years.

After the concrete has dried normally in about seven days the final coat can be installed, here again there are quite a few choices each has advantages and pricing. Probably the most popular and the cheapest is a plaster finish, the plaster is manufactured by mixing marble sand with cement. The plaster is put on by highly trained contractors using various trowels to put on a even coat. One other familiar choice is pool paint. If you are looking for an even better custom look you might want to choose a mosaic tile which can include any pattern that you might think of. One other choice that is gaining in popularity recently is the aggregate finish this, essentially uses small aggregate in the finish coat clearly the aggregate finish and the mosaic tile will be more expensive.
Although Redwood hot tubs have a long lifespan nothing can outlast the permanence of concrete.

Tags: house additions, home repair, plumbing, landscaping, electrical

Next Post: Simple Landscape Ideas For Your Yard

Comments are closed.